产品详情

1. 可一次完成钢丝绳体切断，绳体两端插套，剪切绳股余头，插编部位整形。

2. 可插编直径在10mm-80mm的钢丝绳，不同规格的机组只需换一根插针就可以完成不同直径的钢丝绳套。

3. 大大减轻工人劳动强度，提高工作效率，节约钢丝绳，增强插编量及安 全系数。

4. 插套机是插编右旋钢丝绳的，“辰力”还可以根据用户需要生产左旋钢丝绳插套机：如用户插编直径80mm-120mm绳体时需提前说明。

5. 使用时的优良操作性能，长时间使用中的无故障率是“辰力”机电产品的zui大特点，相信使用后你更信赖我们。

1. Cutting off the wire rope for one time，and splicing at the two sides，then cutting away the useless strands，at last shaping the splicing section.

2. The machine can splice the wire rope diameter between 10mm-80mm.Different sizes only need to change one pin.

3. Reduce the working force，increase the working efficiency，and save the wire rope cost.

4. This machine is right reversal splicing. And chenli can make left reversal splicing machine according to your need. You must make instruction if you splice the wire rope diameter between 80mm-120mm.

5. Chenli products Good operation function，and long time no trouble. We believe we are more reliable after you using it.